CLC Bnet: BACNet Gateway

The GE Lighting BACnet® Controller (CLCBnet) brings the CLC lighting system through to the BACnet protocol. The CLCBnet maps to the lighting system’s relays, switches, sensors, schedules, controls and dimming channels, and can provide control and schedule functionality to the system itself.

The CLCBnet is a fully programmable native BACnet® Building Controller. It supports multiple communications methods including, as standard, BACnet IP, BACnet over Ethernet and BACnet MS/TP.

Power Requirements
24VAC 50/60 Hz, 12VA
10-28VDC, 4.2W
Class 2

Ambient Ratings
32º to 131º F (0º to 55º C)
10 to 90% RH (non-condensing)

Communication Ports
CAN lighting network
Communications Speed @ 40 kbps
Maximum of 99 nodes per CAN segment

3-Port 10/100 Switch
BACnet IP, BACnet over Ethernet

BACnet MS/TP (Maximum of 99 subnet controllers)
Baud Rate: 9600, 19200, 38400, or 76800 bps (Default

BACnet PTP or TAP protocols, Baud Rate: 9600, 19200, or 38400(Default)

2 USB Host Ports

2 pushbutton switches (Reset; Transfer)

ARM9 32-bit RISC CPU at 240MHz
64MB flash memory
32 MB SDRAM memory
SD/SDIO card slot for memory expansion
Real-time clock (temperature compensated)
Ultracap power backup for RTC & memory
LED indication of CPU and scan status

Device Addressing
Set via software

Controller & Enclosure
5” x 5.4” x 2.6” (127 mm x 137 mm x 66 mm)

Weight (c/w Enclosure)
0. 34 lb. (155 g.) 

  • GE Lightsweep